ES-2048 User’s Guide

Figure 60 Multicast: IGMP Filtering Profile

The following table describes the labels in this screen.

Table 41 Multicast: IGMP Filtering Profile

LABEL

DESCRIPTION

 

 

Profile Name

Enter a descriptive name for the profile for identification purposes.

 

To configure additional rule(s) for a profile that you have already added, enter the

 

profile name and specify a different IP multicast address range.

Start Address

Type the starting multicast IP address for a range of multicast IP addresses that

 

you want to belong to the IGMP filter profile.

End Address

Type the ending multicast IP address for a range of IP addresses that you want to

 

belong to the IGMP filter profile.

 

If you want to add a single multicast IP address, enter it in both the Start Address

 

and End Address fields.

Add

Click Add to save your changes to the switch’s run-time memory. The switch loses

 

these changes if it is turned off or loses power, so use the Save link on the top

 

navigation panel to save your changes to the non-volatile memory when you are

 

done configuring.

Clear

Click Clear to clear the fields to the factory defaults.

 

 

Profile Name

This field displays the descriptive name of the profile.

 

 

Start Address

This field displays the start of the multicast address range.

 

 

End Address

This field displays the end of the multicast address range.

 

 

Delete

To delete the profile(s) and all the accompanying rules, select the profile(s) that

 

you want to remove in the Delete Profile column, then click the Delete button.

 

To delete a rule(s) from a profile, select the rule(s) that you want to remove in the

 

Delete Rule column, then click the Delete button.

Cancel

Click Cancel to clear the Delete Profile/Delete Rule check boxes.

 

 

150

Chapter 19 Multicast