Note: When you use the write memory command without specifying a configuration file index number, the switch saves the changes to the configuration file the switch is currently using.
32.6.2 Resetting to the Factory Default
Follow the steps below to reset the switch back to the factory defaults.
1Enter erase running config to reset the current running configuration.
2Enter write memory to save the changes to the current configuration file. If you want to reset the second configuration file, use the write memory command again with the specified index number.
The following example resets both configuration files to the factory default settings.
sysname# erase
Chapter 32 User and Enable Mode Commands | 247 |