ES-2048 User’s Guide

Table 74 interface port-channel Commands (continued)

COMMAND

DESCRIPTION

PRIVILEGE

 

 

 

 

 

 

help

 

Displays a description of the

13

 

 

 

interface port-channel commands.

 

 

exit

 

Exits from the interface port-

13

 

 

 

channel command mode.

 

 

intrusion-lock

 

Enables intrusion lock on a port

13

 

 

 

and a port cannot be connected

 

 

 

 

again after you disconnected the

 

 

 

 

cable.

 

 

test

 

Performs an interface loopback

13

 

 

 

test.

 

 

protocol-based-

 

Creates a protocol based VLAN

13

 

vlan name

 

with the specified parameters.

 

 

<name>

 

 

 

 

ethernet-type

 

 

 

 

<ethernet-type>

 

 

 

 

vlan <vid>

 

 

 

 

priority <0-7>

 

 

 

 

 

inactive

Disables the protocol based VLAN.

13

 

weight <wt1>

 

Sets a weight value of one to eight

13

 

<wt2> ... <wt8>

 

to each variable from wt 1 to wt 8.

 

 

ge-spq

 

Sets the interface to use SPQ on

13

 

<q0q1q3q4q5

 

the gigabit ports starting with the

 

 

q6q7>

 

specified queue.

 

 

 

 

 

31.11.5 config-vlan Commands

The following table lists the vlan commands in configuration mode.

Table 75 Command Summary: config-vlan Commands

COMMAND

 

DESCRIPTION

PRIVILEGE

 

 

 

 

 

vlan <1-

 

 

Creates a new VLAN group.

13

4094>

 

 

 

 

 

name <name-str>

 

Specifies a name for identification

13

 

 

 

purposes.

 

 

normal <port-

 

Specifies the port(s) to dynamically

13

 

list>

 

join this VLAN group using GVRP

 

 

fixed <port-

 

Specifies the port(s) to be a

13

 

list>

 

permanent member of this VLAN

 

 

 

 

group.

 

 

forbidden <port-

 

Specifies the port(s) you want to

13

 

list>

 

prohibit from joining this VLAN

 

 

 

 

group.

 

 

untagged <port-

 

Specifies the port(s) you don’t want

13

 

list>

 

to tag all outgoing frames

 

 

 

 

transmitted with this VLAN Group

 

 

 

 

ID.

 

Chapter 31 Introducing Commands

237