ES-2048 User’s Guide

Table 71 Command Summary: User Mode (continued)

COMMAND

 

DESCRIPTION

PRIVILEGE

 

 

 

 

 

<IPhost-name> [vlan

Sends Ping request to an Ethernet device in the

0

 

<vlan-id>]

specified VLAN(s) with the specified parameters.

 

 

[size <0-1472>]

 

 

 

[-t]

 

 

 

help

Displays command help information.

0

traceroute

<iphost-name>

Determines the path a packet takes to a device.

0

 

<iphost-name>

Determines the path a packet takes to a device in a

0

 

[vlan <vlan-id>]

VLAN.

 

 

[ttl <1-255>]

 

 

 

[wait <1-60>]

 

 

 

[queries <1-10>]

 

 

 

help

Displays command help information.

0

ssh

<12> <[user@]dest-

Connects to an SSH server with the specified SSH

0

 

ip>

version.

 

31.11.2 Enable Mode

The following table describes the commands available for Enable mode.

Table 72 Command Summary: Enable Mode

COMMAND

 

 

DESCRIPTION

PRIVILEGE

 

 

 

 

 

help

 

 

Displays help information.

13

logout

 

 

Exits Enable (or privileged) mode.

13

exit

 

 

Exits Enable (or privileged) mode.

13

history

 

 

Displays a list of command(s) that

13

 

 

 

you have previously executed.

 

enable

 

 

Accesses Enable (or privileged)

13

 

 

 

mode.

 

disable

 

 

Exits Enable (or privileged) mode.

13

configure

 

 

Accesses Configuration mode.

13

 

 

 

See Section 31.11.3 on page 224.

 

stk-port-

 

 

Tests stack port list.

13

test

 

 

 

 

no

logging

 

Clears system logs.

13

 

arp

 

Flushes the ARP (Address

13

 

 

 

Resolution Protocol) table.

 

 

interface <port-

 

Clears the interface status of the

13

 

number>

 

specified port(s).

 

show

ip

 

Displays IP related information.

13

 

 

arp

Displays the ARP table.

13

 

 

tcp

Displays TCP related information.

13

Chapter 31 Introducing Commands

219