ES-2048 User’s Guide

33.4.4.1no trunk

Syntax:

no trunk <T1T2T3T4T5T6>

no trunk <T1T2T3T4T5T6> lacp

no trunk <T1T2T3T4T5T6> interface <port-list>

where

 

<T1T2T3T4T5T6>

= Disables the trunk group.

<T1T2T3T4T5T6>

= Disables LACP in the trunk group.

lacp

 

<T1T2T3T4T5T6>

= Removes ports from the trunk group.

interface <port-list>

 

An example is shown next.

Disable trunk one (T1).

Disable LAPC on trunk three (T3).

Remove ports one, three, four and five from trunk two (T2).

sysname(config)# no trunk T1 sysname(config)# no trunk T3 lacp sysname(config)# no trunk T2 interface 1,3-5

33.4.4.2 no port-access-authenticator

Syntax:

no port-access-authenticator

no port-access-authenticator <port-list> reauthenticate no port-access-authenticator <port-list>

where

 

 

 

= Disables port authentication on the switch.

<port-list>

=

Disables the re-authentication mechanism on the listed port(s).

reauthenticate

 

 

<port-list>

=

Disables authentication on the listed ports.

An example is shown next.

Disable authentication on the switch.

Disable re-authentication on ports one, three, four and five.

Disable authentication on ports one, six and seven.

254

Chapter 33 Configuration Mode Commands