ES-2048 User’s Guide

Figure 106 no port-access-authenticator Command Example

sysname(config)# no port-access-authenticator

sysname(config)# no port-access-authenticator 1,3-5 reauthenticate sysname(config)# no port-access-authenticator 1,6-7

33.4.4.3no ssh

Syntax:

no ssh key <rsa1rsadsa> no ssh known-hosts <host-ip>

no ssh known-hosts <host-ip> [1024ssh-rsassh-dsa]

where

 

 

key <rsa1rsadsa>

=

Disables the secure shell server encryption key. Your switch

 

 

supports SSH versions 1 and 2 using RSA and DSA

 

 

authentication.

known-hosts <host-ip>

=

Removes a specific remote host from the list of all known

 

 

hosts.

known-hosts <host-ip>

=

Removes remote known hosts with a specified public key

[1024ssh-rsassh-dsa]

 

type (1024-bit RSA1, RSA or DSA).

An example is shown next.

 

 

•Disable the secure shell RSA1 encryption key.

•Remove the remote host with IP address 172.165.1.8 from the list of known hosts.

•Remove the remote host with IP address 172.165.1.9 and with an SSH-RSA encryption key from the list of known hosts.

sysname(config)# no ssh key rsa1 sysname(config)# no ssh known-hosts 172.165.1.8 sysname(config)# no ssh known-hosts 172.165.1.9 ssh-rsa

33.5 Queuing Method Commands

You can use the queuing method commands to configure queuing for outgoing traffic on the switch. You can only select one queuing method for the switch.

Chapter 33 Configuration Mode Commands

255