Table 53 SNMP Commands
COMMAND | DESCRIPTION |
|
|
Set | Allows the manager to set values for object variables within an agent. |
|
|
Trap | Used by the agent to inform the manager of some events. |
|
|
24.3.1 Supported MIBs
MIBs let administrators collect statistics and monitor status and performance.
The switch supports the following MIBs:
•SNMP MIB II (RFC 1213)
•RFC 1157 SNMP v1
•RFC 1493 Bridge MIBs
•RFC 1643 Ethernet MIBs
•RFC 1155 SMI
•RFC 2674 SNMPv2, SNMPv2c
•RFC 1757 RMON
•SNMPv2, SNMPv2c or later version, compliant with RFC 2011 SNMPv2 MIB for IP, RFC 2012 SNMPv2 MIB for TCP, RFC 2013 SNMPv2 MIB for UDP
24.3.2SNMP Traps
The switch sends traps to an SNMP manager when an event occurs. SNMP traps supported are outlined in the following table.
Table 54 SNMP Traps
OBJECT LABEL | OBJECT ID | DESCRIPTION |
|
|
|
SNMPv2 Traps |
|
|
|
|
|
Cold Start | 1.3.6.1.6.3.1.1.5.1 | This trap is sent when the switch is turned on. |
|
|
|
WarmStart | 1.3.6.1.6.3.1.1.5.2 | This trap is sent when the switch restarts. |
|
|
|
linkDown | 1.3.6.1.6.3.1.1.5.3 | This trap is sent when the Ethernet link is down. |
|
|
|
linkUp | 1.3.6.1.6.3.1.1.5.4 | This trap is sent when the Ethernet link is up. |
|
|
|
authenticationFailure | 1.3.6.1.6.3.1.1.5.5 | This trap is sent when an SNMP request comes from |
|
| |
RFC 1493 Traps |
|
|
|
|
|
newRoot | 1.3.6.1.2.1.17.0.1 | This trap is sent when the STP topology changes. |
|
|
|
topology change | 1.3.6.1.2.1.17.0.2 | This trap is sent when the STP root switch changes. |
|
|
|
Chapter 24 Access Control | 179 |