ES-2048 User’s Guide

Table 74 interface port-channel Commands

(continued)

 

 

 

 

 

 

 

COMMAND

 

DESCRIPTION

PRIVILEGE

 

 

 

 

 

 

 

egress set

 

 

Sets the outgoing traffic port list for

13

 

<port-list>

 

 

a port-based VLAN.

 

 

igmp-immediate-

 

 

Enables IGMP immediate leave on

13

 

leave

 

 

the port.

 

 

igmp-filtering

 

 

Sets the IGMP filtering profile for

13

 

profile <name>

 

 

this port.

 

 

igmp-group-

 

 

Limits the number of multicast

13

 

limited

 

 

groups.

 

 

igmp-group-

 

 

Sets the number of multicast

13

 

limited number

 

 

groups this port is allowed to join.

 

 

<number>

 

 

 

 

 

igmp-querier-

 

 

Sets the IGMP querier mode of a

13

 

mode

 

 

port.

 

 

<autofixededg

 

 

Selects auto to treat the IGMP

 

 

e>

 

 

queries normally, fixed to

 

 

 

 

 

always treat the port as a querier

 

 

 

 

 

port no matter there is a query or

 

 

 

 

 

edge to treat the port as a non-

 

 

 

 

 

querier port which drops any IGMP

 

 

 

 

 

queries received.

 

 

pvid <1-4094>

 

 

The default PVID is VLAN 1 for all

13

 

 

 

 

ports. Sets a PVID in the range 1 to

 

 

 

 

 

4094 for the specified interface.

 

 

ingress-check

 

 

Enables the device to discard

13

 

 

 

 

incoming frames for VLANs that

 

 

 

 

 

are not included in a port member

 

 

 

 

 

set.

 

 

gvrp

 

 

Enables this function to permit

13

 

 

 

 

VLAN groups beyond the local

 

 

 

 

 

switch.

 

 

frame-type

 

 

Choose to accept both tagged and

13

 

<alltaggedunt

 

 

untagged incoming frames, just

 

 

agged>

 

 

tagged incoming frames or just

 

 

 

 

untagged incoming frames on a

 

 

 

 

 

port.

 

 

name <port-

 

 

Sets a name for the port(s). Enter

13

 

name-string>

 

 

a descriptive name (up to nine

 

 

 

 

 

printable ASCII characters).

 

 

vlan-trunking

 

 

Enables VLAN Trunking on ports

13

 

 

 

 

connected to other switches or

 

 

 

 

 

routers (but not ports directly

 

 

 

 

 

connected to end users) to allow

 

 

 

 

 

frames belonging to unknown

 

 

 

 

 

VLAN groups to pass through the

 

 

 

 

 

switch.

 

 

flow-control

 

 

Enables interface flow control.

13

 

 

 

 

Flow control regulates

 

 

 

 

 

transmissions to match the

 

 

 

 

 

bandwidth of the receiving port.

 

 

bandwidth-limit

 

 

Enables ingress (pir), cir and

13

 

 

 

 

egress limits on the port(s).

 

234

Chapter 31 Introducing Commands