ZyXEL Communications ES-2048 5.2 Configuring Switch Management IP Address, PVID, Apply

ES-2048 User’s Guide

Figure 23 Initial Setup Network Example: Port VID

1Click Advanced Applications and VLAN in the navigation panel. Then click the VLAN Port Setting link.

2 Enter 2 in the PVID field for port

1 and click Apply to save your changes back to the run-time memory. Settings in the run-time memory are lost when the ES- 2048’s power is turned off.

5.2 Configuring Switch Management IP Address

The default in-band management IP address of the switch is 192.168.1.1. You can configure another IP address in a different subnet for management purposes. The following figure shows an example.

Figure 24 Initial Setup Example: Management IP Address

1Connect your computer to any Ethernet port on the switch. Make sure your computer is in the same subnet as the switch.

2Open your web browser and enter 192.168.1.1 (the default IP address) in the address bar to access the web configurator. See Section 4.2 on page 47 for more information.

Chapter 5 Initial Setup Example 59