This command displays statistics of a port. The following example shows that port 2 is up and the related information.
sysname# show interface 2 | :2 | |
Port Info | Port NO. | |
| Link | :100M/F |
| Status | :FORWARDING |
| LACP | :Disabled |
| TxPkts | :0 |
| RxPkts | :63 |
| Errors | :0 |
| Tx KBs/s | :0.0 |
| Rx KBs/s | :0.0 |
TX Packet | Up Time | :0:02:33 |
Tx Packets | :0 | |
| Multicast | :0 |
| Broadcast | :0 |
| Pause | :0 |
RX Packet | Tagged | :0 |
Rx Packets | :63 | |
| Multicast | :0 |
| Broadcast | :63 |
| Pause | :0 |
TX Collison | Control | :0 |
Single | :0 | |
| Multiple | :0 |
| Excessive | :0 |
Error Packet | Late | :0 |
RX CRC | :0 | |
| Length | :0 |
Distribution | Runt | :0 |
64 | :3 | |
| 65 to 127 | :44 |
| 128 to 255 | :14 |
| 256 to 511 | :2 |
| 512 to 1023 | :0 |
| 1024 to 1518 | :0 |
sysname# | Giant | :0 |
|
| |
32.2.5 show mac address-table
Syntax:
show mac
Where
<sort> = Specifies the sorting criteria (MAC, VID or port).
Chapter 32 User and Enable Mode Commands | 243 |