ES-2048 User’s Guide

where

<peertunneldiscard = Type peer to process any BPDUs received on these ports. network>

Type tunnel to forward BPDUs received on these ports. Type discard to drop any BPDUs received on these ports.

Type network to process a BPDU with no VLAN tag and forward a tagged BPDU.

An example is shown next.

•Enable ports 1, 3, 4 and 5 for configuration.

•Set the BPDU control to tunnel, to forward BPDUs received on ports one, three, four and five.

sysname(config)# interface port-channel 1,3-5 sysname(config-interface)# bpdu-control tunnel sysname(config-interface)#

34.2.3 broadcast-limit

Syntax:

broadcast-limit broadcast-limit <pkt/s>

where

 

 

 

=

Enables broadcast storm control limit on the switch.

<pkt/s>

=

Limits how many broadcast packet the interface receives per second.

An example is shown next.

•Enable port one for configuration.

•Enable broadcast control.

•Set how many broadband packets the interface receives per second.

sysname(config)# interface port-channel 1 sysname(config-interface)# broadcast-limit sysname(config-interface)# broadcast-limit 21

34.2.4 bandwidth-limit

The bandwidth-limitcommand enables bandwidth control on the switch.

264

Chapter 34 Interface Commands