Table 43 MVR: Group Configuration
LABEL | DESCRIPTION |
|
|
Name | This field displays the descriptive name for this setting. |
|
|
Start Address | This field displays the starting IP address of the multicast group. |
|
|
End Address | This field displays the ending IP address of the multicast group. |
|
|
Delete | Select Delete All and click Delete to remove all entries from the table. |
| Select Delete Group and click Delete to remove the selected entry(ies) from the table. |
|
|
Cancel | Select Cancel to clear the checkbox(es) in the table. |
|
|
19.7.1 MVR Configuration Example
The following figure shows a network example where ports 1, 2 and 3 on the switch belong to VLAN 1. In addition, port 7 belongs to the multicast group with VID 200 to receive multicast traffic (the News and Movie channels) from the remote streaming media server, S. Computers A, B and C in VLAN 1 are able to receive the traffic.
Figure 65 MVR Configuration Example
To configure the MVR settings on the switch, create a multicast group in the MVR screen and set the receiver and source ports.
156 | Chapter 19 Multicast |