ZyXEL Communications ES-2048 manual 169

ES-2048 User’s Guide

Figure 74 DiffServ: DSCP Setting

The following table describes the labels in this screen.

Table 48 DiffServ: DSCP Setting

LABEL	DESCRIPTION
0 … 63	This is the DSCP classification identification number.
	To set the IEEE802.1p priority mapping, select the priority level from the drop-down list box.
Apply	Click Apply to save your changes to the switch’s run-time memory. The switch loses these
	changes if it is turned off or loses power, so use the Save link on the top navigation panel to
	save your changes to the non-volatile memory when you are done configuring.
Cancel	Click Cancel to discard all changes and start configuring the screen again.

Chapter 22 DiffServ Code Point 167