ES-2048 User’s Guide

Figure 25 Status

The following table describes the labels in this screen.

Table 6

Status

 

 

 

LABEL

 

DESCRIPTION

 

 

 

Port

 

This identifies the Ethernet port. Click a port number to display the Port Details

 

 

screen (refer to Figure 26 on page 64).

Name

 

This is the name you assigned to this port in the Basic Setting, Port Setup screen.

 

 

 

Link

 

This field displays the speed (either 10M for 10Mbps, 100M for 100Mbps or 1000M

 

 

for 1000Mbps) and the duplex (F for full duplex or H for half). It also shows the cable

 

 

type (Copper or Fiber) for the combo ports.

State

 

If STP (Spanning Tree Protocol) is enabled, this field displays the STP state of the

 

 

port (see Section 11.1 on page 105 for more information).

 

 

If STP is disabled, this field displays FORWARDING if the link is up, otherwise, it

 

 

displays STOP.

LACP

 

This fields displays whether LACP (Link Aggregation Control Protocol) has been

 

 

enabled on the port.

TxPkts

 

This field shows the number of transmitted frames on this port.

 

 

 

62

Chapter 6 System Status and Port Statistics