ES-2048 User’s Guide

Table 72 Command Summary: Enable Mode (continued)

COMMAND

 

 

DESCRIPTION

PRIVILEGE

 

 

 

 

 

 

 

session

Displays current SSH session(s).

13

 

https

 

Displays the HTTPS information.

13

 

 

session

Displays current HTTPS

13

 

 

 

session(s).

 

 

 

certificate

Displays the HTTPS certificates.

13

 

 

key <rsadsa>

Displays the HTTPS key.

13

 

 

timeout

Displays the HTTPS session

13

 

 

 

timeout.

 

 

multi-login

 

Displays multi-login information

13

 

plt

 

Displays Packet Loop Test (PLT).

13

 

mac-aging-time

 

Displays MAC learning aging

13

 

 

 

time.

 

 

cluster

 

Displays cluster management

13

 

 

 

status.

 

 

 

candidates

Displays cluster candidate

13

 

 

 

information.

 

 

 

member

Displays the MAC address of the

13

 

 

 

cluster member(s).

 

 

 

member mac <mac-

Displays the status of the cluster

13

 

 

addr>

member(s).

 

 

 

member config

Displays the configuration of the

13

 

 

 

cluster member(s).

 

 

igmp-filtering

 

Displays IGMP filter profile

13

 

profile

 

settings.

 

 

igmp-snooping

 

Displays IGMP snooping settings.

13

 

multicast

 

Displays multicast settings.

13

 

mvr

 

DIsplays all MVR (Multicast VLAN

13

 

 

 

Registration) settings.

 

 

 

<vlan-id>

DIsplays specified MVR

13

 

 

 

information.

 

 

diffserv

 

Displays DiffServ settings on the

13

 

 

 

switch.

 

igmp-flush

 

 

Removes all IGMP information.

13

kick tcp

<Session ID>

 

Resets a TCP connection. Use

13

 

 

 

the show ip tcp command to

 

 

 

 

get the Session ID.

 

mac-flush

 

 

Clears the MAC address table.

13

 

<port-num>

 

Removes all learned MAC

13

 

 

 

address on the specified port(s).

 

erase

running-config

 

Resets to the factory default

13

 

 

 

settings.

 

222

Chapter 31 Introducing Commands