|
| |
| Table 7 Status: Port Details (continued) | |
|
|
|
| LABEL | DESCRIPTION |
|
|
|
| Status | If STP (Spanning Tree Protocol) is enabled, this field displays the STP state of the port |
|
| (see Section 11.1 on page 105 for more information). |
|
| If STP is disabled, this field displays FORWARDING if the link is up, otherwise, it |
|
| displays STOP. |
| LACP | This field shows if LACP is enabled on this port or not. |
|
|
|
| TxPkts | This field shows the number of transmitted frames on this port |
|
|
|
| RxPkts | This field shows the number of received frames on this port |
|
|
|
| Errors | This field shows the number of received errors on this port. |
|
|
|
| Tx KB/s | This field shows the number kilobytes per second transmitted on this port. |
|
|
|
| Rx KB/s | This field shows the number of kilobytes per second received on this port. |
|
|
|
| Up Time | This field shows the total amount of time the connection has been up. |
|
|
|
| Tx Packet |
|
| The following fields display detailed information about packets transmitted. | |
|
|
|
| TX Packet | This field shows the number of good packets (unicast, multicast and broadcast) |
|
| transmitted. |
| Multicast | This field shows the number of good multicast packets transmitted. |
|
|
|
| Broadcast | This field shows the number of good broadcast packets transmitted. |
|
|
|
| Pause | This field shows the number of 802.3x Pause packets transmitted. |
|
|
|
| Tagged | This field shows the number of packets with VLAN tags transmitted. |
|
|
|
| Rx Packet |
|
| The following fields display detailed information about packets received. | |
|
|
|
| RX Packet | This field shows the number of good packets (unicast, multicast and broadcast) |
|
| received. |
| Multicast | This field shows the number of good multicast packets received. |
|
|
|
| Broadcast | This field shows the number of good broadcast packets received. |
|
|
|
| Pause | This field shows the number of 802.3x Pause packets received. |
|
|
|
| Control | This field shows the number of control received (including those with CRC error) but it |
|
| does not include the 802.3x Pause frames. |
| TX Collision |
|
| The following fields display information on collisions while transmitting. | |
|
|
|
| Single | This is a count of successfully transmitted frames for which transmission is inhibited by |
|
| exactly one collision. |
| Multiple | This is a count of successfully transmitted frames for which transmission was inhibited |
|
| by more than one collision. |
| Excessive | This is a count of frames for which transmission failed due to excessive collisions. |
|
| Excessive collision is defined as the number of maximum collisions before the |
|
| retransmission count is reset. |
| Late | This is the number of times a late collision is detected, that is, after 512 bits of the |
|
| frame have already been transmitted. |
| Error Packet |
|
|
|
|
| RX CRC | This field shows the number of packets received with CRC (Cyclic Redundant Check) |
|
| error(s). |
| Length | This field shows the number of frames received with a length that was out of range. |
|
|
|
Chapter 6 System Status and Port Statistics | 65 |