ES-2048 User’s Guide

Figure 69 DHCP Relay

The following table describes the labels in this screen.

Table 44 DHCP Relay

LABEL

DESCRIPTION

 

 

Active

Select this check box to enable DHCP relay.

 

 

Remote DHCP

Enter the IP address of a DHCP server in dotted decimal notation.

Server 1 .. 3

 

Relay Agent

Select the Option 82 check box to have the switch add information (slot number,

Information

port number and VLAN ID) to client DHCP requests that it relays to a DHCP server.

Information

This read-only field displays the system name you configure in the General Setup

 

screen.

 

Select the check box for the switch to add the system name to the DHCP client

 

DHCP requests that it relays to a DHCP server.

Apply

Click Apply to save your changes to the switch’s run-time memory. The switch

 

loses these changes if it is turned off or loses power, so use the Save link on the

 

top navigation panel to save your changes to the non-volatile memory when you

 

are done configuring.

Cancel

Click Cancel to reset the fields.

 

 

160

Chapter 20 DHCP Relay