ES-2048 User’s Guide

The following table describes the related labels in this screen.

Table 16 VLAN: Static VLAN

LABEL

DESCRIPTION

 

 

ACTIVE

Select this check box to activate the VLAN settings.

 

 

Name

Enter a descriptive name for the VLAN group for identification purposes.

 

 

VLAN Group ID

Enter the VLAN ID for this static entry; the valid range is between 1 and 4094.

 

 

Port

The port number identifies the port you are configuring.

 

 

*

Settings in this row apply to all ports.

 

Use this row only if you want to make some settings the same for all ports. Use this

 

row first to set the common settings and then make adjustments on a port-by-port

 

basis.

 

Note: Changes in this row are copied to all the ports as soon as you

 

make them.

Control

Select Normal for the port to dynamically join this VLAN group using GVRP. This is

 

the default selection.

 

Select Fixed for the port to be a permanent member of this VLAN group.

 

Select Forbidden if you want to prohibit the port from joining this VLAN group.

 

 

Tagging

Select TX Tagging if you want the port to tag all outgoing frames transmitted with

 

this VLAN Group ID.

Add

Click Add to save your changes to the switch’s run-time memory. The switch loses

 

these changes if it is turned off or loses power, so use the Save link on the top

 

navigation panel to save your changes to the non-volatile memory when you are

 

done configuring.

Cancel

Click Cancel to reset the fields.

 

 

Clear

Click Clear to start configuring the screen again.

 

 

VID

This field displays the ID number of the VLAN group. Click the number to edit the

 

VLAN settings.

Active

This field indicates whether the VLAN settings are enabled (Yes) or disabled (No).

 

 

Name

This field displays the descriptive name for this VLAN group.

 

 

Delete

Click Delete to remove the selected entry from the summary table.

 

 

Cancel

Click Cancel to clear the Delete check boxes.

8.5.4 Configure VLAN Port Settings

Use the VLAN Port Setting screen to configure the static VLAN (IEEE 802.1Q) settings on a port. See Section 8.1 on page 81 for more information on static VLAN. Click the VLAN Port Setting link in the VLAN Status screen.

88

Chapter 8 VLAN