Prestige 334 User’s Guide

Figure 48 Remote Management: WWW

The following table describes the labels in this screen.

Table 38 Remote Management: WWW

LABEL

DESCRIPTION

 

 

Server Port

You may change the server port number for a service if needed, however you must

 

use the same port number in order to use that service for remote management.

Server Access

Select the interface(s) through which a computer may access the Prestige using

 

this service.

Secured Client IP

A secured client is a “trusted” computer that is allowed to communicate with the

Address

Prestige using this service.

 

Select All to allow any computer to access the Prestige using this service.

 

Choose Selected to just allow the computer with the IP address that you specify to

 

access the Prestige using this service.

Apply

Click Apply to save your customized settings and exit this screen.

 

 

Reset

Click Reset to begin configuring this screen afresh.

 

 

13.3 Configuring Telnet

You can configure your Prestige for remote Telnet access as shown next. The administrator uses Telnet from a computer on a remote network to access the Prestige.

Chapter 13 Remote Management Screens

140