Prestige 334 User’s Guide

You can configure the WAN port's MAC address by either using the factory default or cloning the MAC address from a computer on your LAN. Once it is successfully configured, the address will be copied to the "rom" file (ZyNOS configuration file). It will not change unless you change the setting or upload a different "rom" file.

Table 6 Example of Network Properties for LAN Servers with Fixed IP Addresses

Choose an IP address

192.168.1.2-192.168.1.32; 192.168.1.65-192.168.1.254.

 

 

Subnet mask

255.255.255.0

 

 

Gateway (or default route)

192.168.1.1(Prestige LAN IP)

 

 

The fifth wizard screen varies according to the type of encapsulation that you select in the third wizard screen.

Figure 9 Wizard 3: WAN Setup

The following table describes the labels in this screen

Table 7 Wizard 3: WAN Setup

LABEL

DESCRIPTION

 

 

WAN IP Address Assignment

 

 

Get automatically from

Select this option If your ISP did not assign you a fixed IP address. This is

ISP

the default selection.

Use fixed IP address

Select this option If the ISP assigned a fixed IP address.

 

 

My WAN IP Address

Enter your WAN IP address in this field if you selected Use Fixed IP

 

Address.

My WAN Subnet Mask

Type your IP subnet mask in this field when you selected Use Fixed IP

 

Address.

Chapter 3 Wizard Setup

52