Prestige 334 User’s Guide
Figure 36 Static Route
The following table describes the labels in this screen.
Table 28 | Static Route | |
|
|
|
LABEL |
| DESCRIPTION |
|
|
|
# |
| Number of an individual static route. |
|
|
|
Name |
| Name that describes or identifies this route. |
|
|
|
Active |
| This field shows whether this static route is active (Yes) or not (No). |
|
|
|
Destination |
| This parameter specifies the IP network address of the final destination. Routing is |
|
| always based on network number. |
Gateway |
| This is the IP address of the gateway. The gateway is an immediate neighbor of |
|
| your Prestige that will forward the packet to the destination. On the LAN, the |
|
| gateway must be a router on the same segment as your Prestige; over the WAN, |
|
| the gateway must be the IP address of one of the remote nodes. |
Edit |
| Select a static route index number and then click Edit to set up a static route on the |
|
| Prestige. |
Select a static route index number and click Edit. The screen shown next appears. Fill in the required information for each static route.
103 | Chapter 8 Static Route Screens |