Prestige 334 User’s Guide
19.2.1 Procedure to Configure Dynamic DNSNote: If you have a private WAN IP address, then you cannot use Dynamic DNS
To configure Dynamic DNS, go to Menu 1 — General Setup and select Yes in the Edit Dynamic DNS field. Press [ENTER] to display Menu 1.1— Configure Dynamic DNS as shown next.
Figure 92 Menu 1.1 Configure Dynamic DNS
Menu 1.1 - Configure Dynamic DNS
Service Provider= WWW.DynDNS.ORG
Active= Yes
DDNSType= DynamicDNS
Host1=
Host2=
Host3=
USER=
Password= ********
Enable Wildcard= No
Offline= N/A
Edit Update IP Address:
Use Server Detected IP= No
User Specified IP Address= No
IP Address= N/A
Press ENTER to Confirm or ESC to Cancel:
Follow the instructions in the next table to configure Dynamic DNS parameters.
Table 66 Menu 1.1 Configure Dynamic DNS
FIELD | DESCRIPTION |
|
|
Service Provider | This is the name of your Dynamic DNS service provider. |
|
|
Active | Press [SPACE BAR] to select Yes and then press [ENTER] to make dynamic DNS |
| active. |
DDNS Type | Press [SPACE BAR] and then [ENTER] to select DynamicDNS if you have a |
| dynamic IP address(es). Select StaticDNS if you have a static IP address(s). |
| Select CustomDNS to have dyns.org provide DNS service for a domain name that |
| you already have from a source other than dyndns.org. |
Host 1- 3 | Enter your host name(s) in the fields provided. You can specify up to two host |
| names separated by a comma in each field. |
User | Enter your user name. |
|
|
Password | Enter the password assigned to you. |
|
|
Enable | Your Prestige supports DYNDNS Wildcard. Press [SPACE BAR] and then [ENTER] |
Wildcards | to select Yes or No This field is N/A when you choose DDNS client as your service |
| provider. |
Chapter 19 Menu 1 General Setup | 208 |