Prestige 334 User’s Guide

Table 108 Menu 27.1.1.2 Manual Setup

FIELD DESCRIPTION

Encryption Press [SPACE BAR] to choose from NULL, 3DES or DES and then press [ENTER]. Algorithm Fill in the Key1 field below when you choose DES and fill in fields Key1 to Key3 when

you choose 3DES. Select NULL to set up a tunnel without encryption. When you select NULL, you do not enter any encryption keys.

Key1 Enter a unique eight-character key. Any character may be used, including spaces, but trailing spaces are truncated.

Fill in the Key1 field when you choose DES and fill in fields Key1 to Key3 when you choose 3DES.

Key2 Enter a unique eight-character key. It can be comprised of any character including spaces (but trailing spaces are truncated).

Key3 Enter a unique eight-character key. It can be comprised of any character including spaces (but trailing spaces are truncated).

Authentication Press [SPACE BAR] to choose from MD5 or SHA1 and then press [ENTER]. Algorithm

Key Enter the authentication key to be used by IPSec if applicable. The key must be unique. Enter 16 characters for MD5 authentication and 20 characters for SHA-1authentication. Any character may be used, including spaces, but trailing spaces are truncated.

AH Setup

The AH Setup fields are N/A if you chose an ESP Active Protocol.

SPI (Decimal) The SPI must be from one to four unique decimal characters ("0" to "9") long.

Authentication Press [SPACE BAR] to choose from MD5 or SHA1 and then press [ENTER]. Algorithm

Key Enter the authentication key to be used by IPSec if applicable. The key must be unique. Enter 16 characters for MD5 authentication and 20 characters for SHA-1authentication. Any character may be used, including spaces, but trailing spaces are truncated.

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm…” to save your configuration, or press [ESC] at any time to cancel.

325

Chapter 34 VPN/IPSec Setup