Prestige 334 User’s Guide
Figure 3 Change Password Screen
You should now see the MAIN MENU screen)
Note: The management session automatically times out when the time period set in the Administrator Inactivity Timer field expires (default five minutes). Simply log back into the Prestige if this happens to you
2.3 Resetting the Prestige
If you forget your password or cannot access the web configurator, you will need to use the RESET button at the back of the Prestige to reload the
2.3.1 Procedure To Use The Reset Button
1Make sure the PWR LED is on (not blinking).
2Press the RESET button for ten seconds or until the PWR LED begins to blink and then release it. When the PWR LED begins to blink, the defaults have been restored and the Prestige restarts.
2.3.2Navigating the Prestige Web Configurator
The following summarizes how to navigate the web configurator from the SITE MAP screen.
•Click WIZARD for initial configuration including general setup, ISP parameters for Internet Access and WAN IP/DNS Server/MAC address assignment.
•Click a link under ADVANCED to configure advanced Prestige features.
39 | Chapter 2 Introducing the Web Configurator |