Prestige 334 User’s Guide
Figure 67 Setup: Manual
The following table describes the labels in this screen.
Table 53 Rule Setup: Manual
LABEL | DESCRIPTION |
|
|
Active | Select this check box to activate this VPN policy. |
|
|
IPSec Keying Mode | Select IKE or Manual from the |
| for troubleshooting if you have problems using IKE key management. |
Protocol Number | Enter 1 for ICMP, 6 for TCP, 17 for UDP, etc. 0 is the default and signifies any |
| protocol. |
Local Address | The Local IP address must be static and correspond to the remote IPSec |
| router's configured remote IP addresses. |
| Two active SAs can have the same local or remote IP address, but not both. |
| You can configure multiple SAs between the same local and remote IP |
| addresses, as long as only one is active at any time. |
Local Port Start | "0" is the default and signifies any port. Type a port number from 0 to 65535. |
| Some of the most common IP ports are: 21, FTP; 53, DNS; 23, Telnet; 80, |
| HTTP; 25, SMTP; 110, POP3. |
Chapter 15 VPN Screens | 176 |