![](/images/backgrounds/126821/126821-36695x1.png)
Prestige 334 User’s Guide
Figure 30 SUA/NAT Setup
The following table describes the labels in this screen.
Table 24 SUA/NAT Setup
LABEL | DESCRIPTION |
|
|
Default Server | In addition to the servers for specified services, NAT supports a default server. A |
| default server receives packets from ports that are not specified in this screen. |
| If you do not assign a Default Server IP Address, the Prestige discards all packets |
| received for ports that are not specified in this screen or remote management. |
# | Number of an individual SUA server entry. |
|
|
Active | Select this check box to enable the SUA server entry. Clear this checkbox to |
| disallow forwarding of these ports to an inside server without having to delete the |
| entry. |
Name | Enter a name to identify this |
|
|
Start Port | Enter a port number here. To forward only one port, enter it again in the End Port |
| field. To specify a range of ports, enter the last port to be forwarded in the End Port |
| field. |
End Port |
|
|
|
Server IP | Enter the inside IP address of the server here. |
Address |
|
Apply | Click Apply to save your changes back to the Prestige. |
|
|
Reset | Click Reset to begin configuring this screen afresh. |
|
|
Chapter 7 Network Address Translation (NAT) Screens | 94 |