Prestige 334 User’s Guide

Table 104 Menu 27.1 IPSec Summary

FIELD

DESCRIPTION

 

 

Remote Addr

When the Addr Type field in Menu 27.1.1 IPSec Setup is configured to Single, this is

End

the same (static) IP address as in the Remote Addr Start field.

 

When the Addr Type field in Menu 27.1.1 IPSec Setup is configured to Range, this is

 

the end (static) IP address, in a range of computers on the network behind the remote

 

IPSec router.

 

When the Addr Type field in Menu 27.1.1 IPSec Setup is configured to SUBNET, this

 

is a subnet mask on the network behind the remote IPSec router.

 

This field displays N/A when you configure the Secure Gateway Addr field in SMT

 

27.1.1 to 0.0.0.0.

Secure GW

This is the WAN IP address or the domain name (up to the first 15 characters are

Addr

displayed) of the IPSec router with which you are making the VPN connection. This field

 

displays 0.0.0.0 when you configure the Secure Gateway Addr field in SMT 27.1.1 to

 

0.0.0.0.

Select

Press [SPACE BAR] to choose from None, Edit, Delete, Go To Rule, Next Page or

Command

Previous Page and then press [ENTER]. You must select a rule in the next field when

 

you choose the Edit, Delete or Go To commands.

 

Select None and then press [ENTER] to go to the “Press ENTER to Confirm…” prompt.

 

Use Edit to create or edit a rule. Use Delete to remove a rule. To edit or delete a rule,

 

first make sure you are on the correct page. When a VPN rule is deleted, subsequent

 

rules do not move up in the page list.

 

Use Go To Rule to view the page where your desired rule is listed.

 

Select Next Page or Previous Page to view the next or previous page of rules

 

(respectively).

Select Rule

Type the VPN rule index number you wish to edit or delete and then press [ENTER].

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm…” to save your configuration, or press [ESC] at any time to cancel.

317

Chapter 34 VPN/IPSec Setup