Prestige 334 User’s Guide
Table 7 Wizard 3: WAN Setup
LABEL | DESCRIPTION |
|
|
Gateway IP Address | Type the IP address of the gateway. The gateway is an immediate |
| neighbour of your Prestige that will forward the packet to the destination. |
| The gateway must be a router on the same segment as your Prestige's |
| LAN or WAN port. |
System DNS Server Address Assignment (if applicable)
DNS (Domain Name System) is for mapping a domain name to its corresponding IP address and vice versa. The DNS server is extremely important because without it, you must know the IP address of a computer before you can access it. The Prestige uses a system DNS server (in the order you specify here) to resolve domain names for VPN, DDNS and the time server.
First DNS Server | Select From ISP if your ISP dynamically assigns DNS server information | |
| (and the Prestige's WAN IP address). The field to the right displays the | |
Second DNS Server | ||
Select | ||
| ||
Third DNS Server | DNS server's IP address in the field to the right. | |
Select None if you do not want to configure DNS servers. If you do not | ||
| ||
| configure a system DNS server, you must use IP addresses when | |
| configuring VPN, DDNS and the time server. | |
WAN MAC Address | The MAC address field allows you to configure the WAN port's MAC | |
| Address by either using the factory default or cloning the MAC address | |
| from a computer on your LAN. | |
Factory Default | Select this option to use the factory assigned default MAC Address. | |
|
| |
Spoof this Computer's | Select this option and enter the IP address of the computer on the LAN | |
MAC address - IP Address | whose MAC you are cloning. Once it is successfully configured, the | |
| address will be copied to the rom file (ZyNOS configuration file). It will not | |
| change unless you change the setting or upload a different rom file. It is | |
| advisable to clone the MAC address from a computer on your LAN even if | |
| your ISP does not presently require MAC address authentication. | |
Back | Click Back to return to the previous screen. | |
|
| |
Next | Click Next to continue. | |
|
|
3.5 Basic Setup Complete
Click Back to return to the previous screen or click Finish to complete and save the wizard setup.
53 | Chapter 3 Wizard Setup |