Prestige 334 User’s Guide

Figure 117 Menu 15.1.1.1 Editing/Configuring an Individual Rule in a Set

Menu 15.1.1.1 Address Mapping Rule

Type= One-to-One

Local IP:

Start= 0.0.0.0

End = N/A

Global IP:

Start= 0.0.0.0

End = N/A

Press ENTER to Confirm or ESC to Cancel:

The following table explains the fields in this menu.

Table 83 Menu 15.1.1.1 Editing/Configuring an Individual Rule in a Set

FIELD

DESCRIPTION

 

 

Type

Press [SPACE BAR] and then [ENTER] to select from a total of five types. These are

 

the mapping types discussed in the chapter on NAT web configurator screens. Server

 

allows you to specify multiple servers of different types behind NAT to this computer.

 

See section for an example.

Local IP

Only local IP fields are N/A for server; Global IP fields MUST be set for Server.

 

 

Start

This is the starting local IP address (ILA).

 

 

End

This is the ending local IP address (ILA). If the rule is for all local IPs, then put the Start

 

IP as 0.0.0.0 and the End IP as 255.255.255.255. This field is N/A for One-to-One and

 

Server types.

Global IP

 

 

 

Start

This is the starting inside global IP address (IGA). If you have a dynamic IP, enter

 

0.0.0.0 as the Global IP Start. Note that Global IP Start can be set to 0.0.0.0 only if

 

the types are Many-to-Oneor Server.

End

This is the ending inside global IP address (IGA). This field is N/A for One-to-One,

 

Many-to-One and Server types.

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC to cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.

25.4 Configuring a Server behind NAT

Follow these steps to configure a server behind NAT:

1Enter 15 in the main menu to go to Menu 15 - NAT Setup.

2Enter 2 to display Menu 15.2 - NAT Server Setup as shown next.

243

Chapter 25 Network Address Translation (NAT)