Prestige 334 User’s Guide

2You have disabled that service in one of the remote management screens.

3The IP address in the Secured Client IP field does not match the client IP address. If it does not match, the Prestige will disconnect the session immediately.

4There is already another remote management session with an equal or higher priority running. You may only have one remote management session running at one time.

5There is a firewall rule that blocks it.

13.1.2Remote Management and NAT

When NAT is enabled:

•Use the Prestige’s WAN IP address when configuring from the WAN.

•Use the Prestige’s LAN IP address when configuring from the LAN.

13.1.3System Timeout

There is a default system management idle timeout of five minutes (three hundred seconds). The Prestige automatically logs you out if the management session remains idle for longer than this timeout period. The management session does not time out when a statistics screen is polling. You can change the timeout period in the System screen

13.2 Configuring WWW

To change your Prestige’s World Wide Web settings, click REMOTE MGMT to display the

WWWscreen.

139

Chapter 13 Remote Management Screens