ZyXEL Communications P-334 6.4.2 PPPoE Encapsulation, PPP over Ethernet

Prestige 334 User’s Guide

Figure 19 Ethernet Encapsulation

The following table describes the labels in this screen.

Table 16 Ethernet Encapsulation

LABEL	DESCRIPTION
Encapsulation	You must choose the Ethernet option when the WAN port is used as a regular
	Ethernet.
Service Type	Choose from Standard, Telstra (RoadRunner Telstra authentication method),
	RR-Manager(Roadrunner Manager authentication method), RR-Toshiba
	(Roadrunner Toshiba authentication method) or Telia Login.
	The following fields do not appear with the Standard service type.
User Name	Type the user name given to you by your ISP.
Password	Type the password associated with the user name above.
Retype to Confirm	Type the password again to make sure that you have entered it correctly.
Login Server IP	Type the authentication server IP address here if your ISP gave you one.
Address
Login Server	This field only applies when you select Telia Login in the Service Type field.
	Type the domain name of the Telia login server, for example “login1.telia.com”.
Relogin Every(min)	This field only applies when you select Telia Login in the Service Type field. The
	Telia server logs the Prestige out if the Prestige does not log in periodically. Type
	the number of minutes from 1 to 59 (30 default) for the Prestige to wait between
	logins.
Apply	Click Apply to save your changes back to the Prestige.
Reset	Click Reset to begin configuring this screen afresh.

6.4.2 PPPoE Encapsulation

The Prestige supports PPPoE (Point-to-Point Protocol over Ethernet). PPPoE is an IETF Draft standard (RFC 2516) specifying how a personal computer (PC) interacts with a broadband modem (DSL, cable, wireless, etc.) connection. The PPP over Ethernet option is for a dialup connection using PPPoE.

Chapter 6 WAN Screens 74