Prestige 334 User’s Guide
Table 105 Menu 27.1.1 IPSec Setup
FIELD | DESCRIPTION |
|
|
Port Start | 0 is the default and signifies any port. Type a port number from 0 to 65535. You cannot |
| create a VPN tunnel if you try to connect using a port number that does not match this |
| port number or range of port numbers. |
| Some of the most common IP ports are: 21, FTP; 53, DNS; 23, Telnet; 80, HTTP; 25, |
| SMTP; 110, POP3 |
End | Enter a port number in this field to define a port range. This port number must be |
| greater than that specified in the previous field. This field is N/A when 0 is configured in |
| the Port Start field. |
Remote | Remote IP addresses must be static and correspond to the remote IPSec router’s con- |
| figured local IP addresses. The remote fields are N/A when the Secure Gateway |
| Address field is configured to 0.0.0.0. |
| Two active SAs cannot have the local and remote IP address(es) both the same. Two |
| active SAs can have the same local or remote IP address, but not both. You can |
| configure multiple SAs between the same local and remote IP addresses, as long as |
| only one is active at any time. |
Addr Type | Press [SPACE BAR] to choose SINGLE, RANGE, or SUBNET and press [ENTER]. |
| Select SINGLE with a single IP address. Use RANGE for a specific range of IP |
| addresses. Use SUBNET to specify IP addresses on a network by their subnet mask. |
IP Addr Start | When the Addr Type field is configured to Single, enter a static IP address on the net- |
| work behind the remote IPSec router. |
| When the Addr Type field is configured to Range, enter the beginning (static) IP |
| address, in a range of computers on the network behind the remote IPSec router. |
| When the Addr Type field is configured to SUBNET, enter a static IP address on the |
| network behind the remote IPSec router. |
| This field displays N/A when you configure the Secure Gateway Address field to |
| 0.0.0.0. |
End/Subnet | When the Addr Type field is configured to Single, this field is N/A. |
Mask | When the Addr Type field is configured to Range, enter the end (static) IP address, in |
| a range of computers on the network behind the remote IPSec router. |
| When the Addr Type field is configured to SUBNET, enter a subnet mask on the net- |
| work behind the remote IPSec router. |
| This field displays N/A when you configure the Secure Gateway Address field to |
| 0.0.0.0. |
Port Start | 0 is the default and signifies any port. Type a port number from 0 to 65535. Someone |
| behind the remote IPSec router cannot create a VPN tunnel when attempting to con- |
| nect using a port number that does not match this port number or range of port num- |
| bers. |
| Some of the most common IP ports are: 21, FTP; 53, DNS; 23, Telnet; 80, HTTP; 25, |
| SMTP; 110, POP3. |
End | Enter a port number in this field to define a port range. This port number must be |
| greater than that specified in the previous field. This field is N/A when 0 is configured in |
| the Port Start field. |
Chapter 34 VPN/IPSec Setup | 320 |