ZyXEL Communications P-334 5.5 Configuring Static DHCP, LAN, Static DHCP

Prestige 334 User’s Guide

Table 12 LAN IP

LABEL	DESCRIPTION
Allow between LAN	Select this check box to forward NetBIOS packets from the LAN to the WAN and
and WAN	from the WAN to the LAN. If your firewall is enabled with the default policy set to
	block WAN to LAN traffic, you also need to enable the default WAN to LAN
	firewall rule that forwards NetBIOS traffic.
	Clear this check box to block all NetBIOS packets going from the LAN to the
	WAN and from the WAN to the LAN.
Apply	Click Apply to save your changes back to the Prestige.
Reset	Click Reset to begin configuring this screen afresh.

5.5 Configuring Static DHCP

This table allows you to assign IP addresses on the LAN to specific individual computers based on their MAC Addresses.

Every Ethernet device has a unique MAC (Media Access Control) address. The MAC address is assigned at the factory and consists of six pairs of hexadecimal characters, for example, 00:A0:C5:00:00:02.

To change your Prestige’s Static DHCP settings, click LAN, then the Static DHCP tab. The screen appears as shown.

69 Chapter 5 LAN Screens