Prestige 334 User’s Guide
Use the upgrade tool file with a "*.exe" extension found in the ZIP file and follow the steps to begin the firmware upgrade.
17.4.1 Preparing your Prestige for Firmware Upload1Change the login password of the Prestige to the factory default password of “1234”.
2Change the IP address of the Prestige to the factory default IP address of “192.168.1.1” and make sure that your computer can connect to the Prestige.
•If your computer’s IP address is dynamically assigned by the Prestige, release your computer’s IP address and renew it.
•If your computer’s IP address is statically assigned, make sure that the IP address is in the same subnet as the Prestige, for example: set your computer’s IP address to 192.168.1.33.
3Logout of the Prestige.
Figure 77 Maintenance Firmware Upload
4To open the upgrade tool
5Run the upgrade tool and wait about six minutes for the firmware upgrade to complete.
Chapter 17 Maintenance | 194 |