Prestige 334 User’s Guide

Figure 91 Menu 1 General Setup.

Menu 1 - General Setup

System Name=

Domain Name= zyxel.com.tw

First System DNS Server= From ISP

IP Address= N/A

Second System DNS Server= From ISP

IP Address= N/A

Third System DNS Server= From ISP

IP Address= N/A

Edit Dynamic DNS= No

Press ENTER to Confirm or ESC to Cancel:

2Fill in the required fields. Refer to the table shown next for more information about these fields.

Table 65 Menu 1 General Setup

FIELD

DESCRIPTION

 

 

System Name

Choose a descriptive name for identification purposes. It is recommended you

 

enter your computer’s “Computer name” in this field. This name can be up to 30

 

alphanumeric characters long. Spaces are not allowed, but dashes “-” and

 

underscores "_" are accepted.

Domain Name

Enter the domain name (if you know it) here. If you leave this field blank, the ISP

 

may assign a domain name via DHCP. You can go to menu 24.8 and type "sys

 

domain name" to see the current domain name used by your router.

 

The domain name entered by you is given priority over the ISP assigned domain

 

name. If you want to clear this field just press [SPACE BAR] and then [ENTER].

First System DNS

DNS (Domain Name System) is for mapping a domain name to its corresponding

Server

IP address and vice versa. The DNS server is extremely important because

Second System

without it, you must know the IP address of a machine before you can access it.

The Prestige uses a system DNS server (in the order you specify here) to resolve

DNS Server

domain names for VPN, DDNS and the time server.

Third System DNS

Press [SPACE BAR] and then [ENTER] to select an option. Select From ISP if

Server

your ISP dynamically assigns DNS server information (and the Prestige's WAN IP

 

address). The IP Address field below displays the (read-only) DNS server IP

 

address that the ISP assigns.

 

Select User-Definedif you have the IP address of a DNS server. Enter the DNS

 

server's IP address in the IP Address field. If you select User-Defined, but leave

 

the IP address set to 0.0.0.0, User-Definedchanges to None after you save your

 

changes. If you set a second choice to User-Defined, and enter the same IP

 

address, the second User-Definedchanges to None after you save your

 

changes.

 

Select None if you do not want to configure DNS servers. If you do not configure

 

a system DNS server, you must use IP addresses when configuring VPN, DDNS

 

and the time server.

Edit Dynamic DNS

Press [SPACE BAR] and then [ENTER] to select Yes or No (default). Select Yes

 

to configure Menu 1.1: Configure Dynamic DNS discussed next.

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm…” to save your configuration, or press [ESC] at any time to cancel.

207

Chapter 19 Menu 1 General Setup