Prestige 334 User’s Guide
Figure 136 Menu 21: Filter and Firewall Setup
Menu 21 - Filter and Firewall Setup
1.Filter Setup
2.Firewall Setup
Enter Menu Selection Number:
2Enter 1 to bring up the following menu.
Figure 137 Menu 21.1: Filter Set Configuration
| Menu 21.1 - Filter Set Configuration | ||
Filter | Comments | Filter | Comments |
Set # | Set # | ||
1 | _______________ | 7 | _______________ |
2 | _______________ | 8 | _______________ |
3 | _______________ | 9 | _______________ |
4 | _______________ | 10 | _______________ |
5 | _______________ | 11 | _______________ |
6 | _______________ | 12 | _______________ |
Enter Filter Set Number to Configure= 0
Edit Comments= N/A
Press ENTER to Confirm or ESC to Cancel:
3Select the filter set you wish to configure
4Enter a descriptive name or comment in the Edit Comments field and press [ENTER].
5Press [ENTER] at the message [Press ENTER to confirm] to open Menu 21.1.1 - Filter Rules Summary.
This screen shows the summary of the existing rules in the filter set. The following tables contain a brief description of the abbreviations used in the previous menus.
Table 85 Abbreviations Used in the Filter Rules Summary Menu
FIELD | DESCRIPTION |
|
|
# | The filter rule number: 1 to 6. |
|
|
A | Active: “Y” means the rule is active. “N” means the rule is inactive. |
|
|
Type | The type of filter rule: “GEN” for Generic, “IP” for TCP/IP. |
|
|
Filter Rules | These parameters are displayed here. |
|
|
M | More. |
| “Y” means there are more rules to check which form a rule chain with the present rule. An |
| action cannot be taken until the rule chain is complete. |
| “N” means there are no more rules to check. You can specify an action to be taken i.e., |
| forward the packet, drop the packet or check the next rule. For the latter, the next rule is |
| independent of the rule just checked. |
259 | Chapter 27 Filter Configuration |