Prestige 334 User’s Guide
Figure 102 Menu 11.1 Remote Node Profile for Ethernet Encapsulation
Menu 11.1 - Remote Node Profile
Rem Node Name= MyISP | Route= IP |
Active= Yes | Edit IP= No |
Encapsulation= Ethernet | |
Service Type= Standard | Session Options: |
Service Name= N/A | Edit Filter Sets= No |
Outgoing: |
|
My Login= N/A | Edit Traffic Redirect= No |
My Password= N/A | |
Retype to Confirm= N/A |
|
Server= N/A | N/A |
Relogin Every (min)= |
Press ENTER to Confirm or ESC to Cancel:
The following table describes the fields in this menu.
Table 74 Menu 11.1 Remote Node Profile for Ethernet Encapsulation
FIELD | DESCRIPTION |
|
|
Rem Node Name | Enter a descriptive name for the remote node. This field can be up to eight |
| characters. |
Active | Press [SPACE BAR] and then [ENTER] to select Yes (activate remote node) or |
| No (deactivate remote node). |
Encapsulation | Ethernet is the default encapsulation. Press [SPACE BAR] and then [ENTER] to |
| change to PPPoE or PPTP encapsulation. |
Service Type | Press [SPACE BAR] and then [ENTER] to select from Standard, |
| (RoadRunner Toshiba authentication method), |
| Manager authentication method), |
| RoadRunner methods if your ISP is Time Warner's RoadRunner; otherwise |
| choose Standard. |
Outgoing |
|
|
|
My Login | This field is applicable for PPPoE encapsulation only. Enter the login name |
| assigned by your ISP when the Prestige calls this remote node. Some ISPs |
| append this field to the Service Name field above (e.g., jim@poellc) to access the |
| PPPoE server. |
My Password | Enter the password assigned by your ISP when the Prestige calls this remote |
| node. Valid for PPPoE encapsulation only. |
Retype to Confirm | Type your password again to make sure that you have entered it correctly. |
|
|
Server | This field is valid only when RoadRunner is selected in the Service Type field. |
| The Prestige will find the RoadRunner Server IP automatically if this field is left |
| blank. If it does not, then you must enter the authentication server IP address |
| here. |
Relogin Every | This field is available when you select Telia Login in the Service Type field. |
(min) | The Telia server logs the Prestige out if the Prestige does not log in periodically. |
| Type the number of minutes from 1 to 59 (30 recommended) for the Prestige to |
| wait between logins. |
Route | This field refers to the protocol that will be routed by your Prestige – IP is the only |
| option for the Prestige. |
225 | Chapter 23 Remote Node Configuration |