Prestige 334 User’s Guide
Figure 160 Telnet into Menu 24.6.
Menu 24.6
To transfer the firmware and configuration file to your workstation, follow the procedure below:
1.Launch the FTP client on your workstation.
2.Type "open" and the IP address of your Prestige. Then type "root" and SMT password as requested.
3.Type "put backupfilename
4.The system reboots automatically after a successful file transfer
For details on FTP commands, please consult the documentation of your FTP client program. For details on backup using TFTP (note that you must remain in this menu to back up using TFTP), please see your Prestige manual. Press ENTER to Exit:
1Launch the FTP client on your computer.
2Enter “open”, followed by a space and the IP address of your Prestige.
3Press [ENTER] when prompted for a username.
4Enter your password as requested (the default is “1234”).
5Enter “bin” to set transfer mode to binary.
6Find the “rom” file (on your computer) that you want to restore to your Prestige.
7Use “put” to transfer files from the Prestige to the computer, for example, “put config.rom
8Enter “quit” to exit the ftp prompt. The Prestige will automatically restart after a successful restore process.
Chapter 30 Firmware and Configuration File Maintenance | 292 |