Prestige 334 User’s Guide

Figure 116 Menu 15.1.1 First Set

Menu

15.1.1

- Address

Mapping Rules

Set Name=

NAT_SET

Local End IP Global Start IP Global End IP Type

Idx

Local

Start IP

------------------ -------------- --------------- --------------- ------

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

Action= Edit

Select Rule=

Press ENTER to Confirm or ESC to Cancel:

Note: If the Set Name field is left blank, the entire set will be deleted.

Note: The Type, Local and Global Start/End IPs are configured in menu 15.1.1.1 (described later) and the values are displayed here

25.3.1.2 Ordering Your Rules

Ordering your rules is important because the Prestige applies the rules in the order that you specify. When a rule matches the current packet, the Prestige takes the corresponding action and the remaining rules are ignored. If there are any empty rules before your new configured rule, your configured rule will be pushed up by that number of empty rules. For example, if you have already configured rules 1 to 6 in your current set and now you configure rule number 9. In the set summary screen, the new rule will be rule 7, not 9.

241

Chapter 25 Network Address Translation (NAT)