Prestige 334 User’s Guide

 

Table 18 PPTP Encapsulation

 

 

 

 

LABEL

DESCRIPTION

 

 

 

 

Retype to Confirm

Type your password again to make sure that you have entered is correctly.

 

 

 

 

Nailed-up Connection

Select Nailed-Up Connection if you do not want the connection to time out.

 

 

 

 

Idle Timeout

This value specifies the time in seconds that elapses before the Prestige

 

 

automatically disconnects from the PPTP server.

 

PPTP Configuration

 

 

 

 

 

My IP Address

Type the (static) IP address assigned to you by your ISP.

 

 

 

 

My IP Subnet Mask

Your Prestige will automatically calculate the subnet mask based on the IP

 

 

address that you assign. Unless you are implementing subnetting, use the

 

 

subnet mask computed by the Prestige.

 

Server IP Address

Type the IP address of the PPTP server.

 

 

 

 

Connection ID/Name

Type your identification name for the PPTP server.

 

 

 

 

Apply

Click Apply to save your changes back to the Prestige.

 

 

 

 

Reset

Click Reset to begin configuring this screen afresh.

 

 

 

6.5 Configuring WAN IP

To change your Prestige’s WAN IP settings, click WAN, then the WAN IP tab. This screen varies according to the type of encapsulation you select.

If your ISP did not assign you a fixed IP address, click Get automatically from ISP (Default);otherwise click Use fixed IP Address and enter the IP address in the field provided.

Chapter 6 WAN Screens

78