Prestige 334 User’s Guide
Figure 148 Menu 22 SNMP Configuration
Menu 22 - SNMP Configuration
SNMP:
Get Community= public
Set Community= public
Trusted Host= 0.0.0.0
Trap:
Community= public
Destination= 0.0.0.0
Press ENTER to Confirm or ESC to Cancel:
The following table describes the SNMP configuration parameters.
Table 89 Menu 22 SNMP Configuration
FIELD | DESCRIPTION |
|
|
SNMP: |
|
Get Community | Type the Get Community, which is the password for the incoming Get- and |
| GetNext requests from the management station. |
Set Community | Type the Set community, which is the password for incoming Set requests from |
| the management station. |
Trusted Host | If you enter a trusted host, your Prestige will only respond to SNMP messages |
| from this address. A blank (default) field means your Prestige will respond to all |
| SNMP messages it receives, regardless of source. |
Trap: |
|
Community Type the trap community, which is the password sent with each trap to the SNMP manager.
Destination Type the IP address of the station to send your SNMP traps to.
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC to cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.
28.4 SNMP Traps
The Prestige will send traps to the SNMP manager when any one of the following events occurs:
Table 90 | SNMP Traps |
|
|
|
|
TRAP # | TRAP NAME | DESCRIPTION |
|
|
|
1 | coldStart (defined in | A trap is sent after booting (power on). |
|
|
|
2 | warmStart (defined in | A trap is sent after booting (software reboot). |
|
|
|
3 | linkDown (defined in | A trap is sent with the port number when any of the |
|
| links are down. See the following table. |
Chapter 28 SNMP Configuration | 272 |