Prestige 334 User’s Guide
Figure 60 VPN: Summary
The following table describes the labels in this screen.
Table 47 VPN: Summary
LABEL | DESCRIPTION |
|
|
# | The VPN policy index number. |
|
|
Active | This field displays whether the VPN policy is active or not. A Y signifies that this |
| VPN policy is active. N signifies that this VPN policy is not active. |
Local Addr. | This is the IP address of the computer on your local network behind your Prestige. |
|
|
Remote Addr. | This is the IP address(es) of computer(s) on the remote network behind the |
| remote IPSec router. |
| A single (static) IP address is displayed when the Remote Address Start and |
| Remote Address End/Mask fields in the Rule Setup IKE (or Manual) screen are |
| both configured to the same IP address. |
| The beginning and ending (static) IP addresses, in a range of computers are |
| displayed when the Remote Address Start and Remote Address End/Mask |
| fields in the Rule Setup IKE (or Manual) screen are configured for a range of IP |
| addresses. |
| A (static) IP address and a subnet mask are displayed when the Remote Address |
| Start and Remote Address End/Mask fields in the Rule Setup IKE (or Manual) |
| screen are configured for a subnet. |
| This field displays 0.0.0.0 when the Secure Gateway Address field is set to |
| 0.0.0.0. In this case only the remote IPSec router can initiate the VPN. |
Encap. | This field displays Tunnel or Transport mode (Tunnel is the default selection). |
|
|
Algorithm | This field displays the security protocols used for an SA. |
| Both AH and ESP increase Prestige processing requirements and |
| communications latency (delay). |
Gateway | This is the static WAN IP address or URL of the remote IPSec router. This field |
| displays 0.0.0.0 when you configure the Secure Gateway Addr field in the Rule |
| Setup IKE screen to 0.0.0.0. |
Select the radio button next to a VPN index number and then click Edit to edit a specific VPN policy. Click the radio button next to an empty VPN policy index number and then Edit to add a new VPN policy.
Select the radio button next to a VPN policy number you want to delete and then click Delete. When a VPN policy is deleted, subsequent policies do not move up in the list.
159 | Chapter 15 VPN Screens |