Prestige 334 User’s Guide

Figure 104 Menu 11.1 Remote Node Profile for PPTP Encapsulation

Menu 11.1 - Remote Node Profile

Rem Node Name= MyISP

Route= IP

Active= Yes

Apply Alias= None

Encapsulation= PPTP

Edit IP= No

Service Type= Standard

Telco Option:

Service Name= N/A

Allocated Budget(min)= 0

Outgoing:

Period(hr)= 0

My Login=

Schedules=

My Password= ********

Nailed-Up Connection= No

Retype to Confirm= ********

 

Authen= CHAP/PAP

Session Options:

PPTP:

My IP Addr=

Edit Filter Sets= No

My IP Mask=

Idle Timeout(sec)= 100

Server IP Addr=

Edit Traffic Redirect= No

Connection ID/Name=

Press ENTER to Confirm or ESC to Cancel:

The next table shows how to configure fields in menu 11.1 not previously discussed.

Table 76 Menu 11.1 Remote Node Profile for PPTP Encapsulation

FIELD

DESCRIPTION

 

 

Encapsulation

Press [SPACE BAR] and then [ENTER] to select PPTP. You must also go to menu

 

11.3 to check the IP Address setting once you have selected the encapsulation

 

method.

My IP Addr

Enter the IP address of the WAN Ethernet port.

 

 

My IP Mask

Enter the subnet mask of the WAN Ethernet port.

 

 

Server IP Addr

Enter the IP address of the ANT modem.

 

 

Connection ID/

Enter the connection ID or connection name in the ANT. It must follow the “c:id” and

Name

“n:name” format.

 

This field is optional and depends on the requirements of your DSL modem.

 

 

23.3 Edit IP

Move the cursor to the Edit IP field in menu 11.1, then press [SPACE BAR] to select Yes. Press [ENTER] to open Menu 11.3 - Remote Node Network Layer Options.

Chapter 23 Remote Node Configuration

228