![](/images/backgrounds/126821/126821-36662x1.png)
Prestige 334 User’s Guide
Figure 14 Time Setting
The following table describes the labels in this screen.
Table 11 Time Setting
LABEL | DESCRIPTION |
|
|
Use Time Server | Select the time service protocol that your time server sends when you turn on |
when Bootup | the Prestige. Not all time servers support all protocols, so you may have to |
| check with your ISP/network administrator or use trial and error to find a protocol |
| that works. |
| The main difference between them is the format. |
| Daytime (RFC 867) format is day/month/year/time zone of the server. |
| Time (RFC 868) format displays a |
| seconds since 1970/1/1 at 0:0:0. |
| The default, NTP (RFC 1305), is similar to Time (RFC 868). |
| Select None to enter the time and date manually. |
|
|
Time Server | Enter the IP address or URL (up to 20 extended ASCII characters in length) of |
Address | your time server. Check with your ISP/network administrator if you are unsure of |
| this information. |
Current Time | This field displays the time of your Prestige. |
| Each time you reload this page, the Prestige synchronizes the time with the time |
| server. |
New Time | This field displays the last updated time from the time server. |
| When you select None in the Time Protocol field, enter the new time in this |
| field and then click Apply. |
Current Date | This field displays the date of your Prestige. |
| Each time you reload this page, the Prestige synchronizes the time with the time |
| server. |
61 | Chapter 4 System Screens |