Prestige 334 User’s Guide
CHAPTER 20
Menu 2 WAN Setup
This chapter describes how to configure the WAN using menu 2.
20.1 Introduction to WAN
This chapter explains how to configure settings for your WAN port.
20.2 WAN Setup
From the main menu, enter 2 to open menu 2.
Figure 93 Menu 2 WAN Setu
Menu 2 - WAN Setup
MAC Address:
Assigned By= Factory default
IP Address= N/A
Press ENTER to Confirm or ESC to Cancel:
The following table describes the fields in this menu.
Table 67 Menu 2 WAN Setup
FIELD | DESCRIPTION |
|
|
MAC Address |
|
|
|
Assigned By | Press [SPACE BAR] and then [ENTER] to choose one of two methods to assign a |
| MAC Address. Choose Factory Default to select the factory assigned default |
| MAC Address. Choose IP address attached on LAN to use the MAC Address of |
| that computer whose IP you give in the following field. |
IP Address | This field is applicable only if you choose the IP address attached on LAN |
| method in the Assigned By field. Enter the IP address of the computer on the |
| LAN whose MAC you are cloning. |
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm…” to save your configuration, or press [ESC] at any time to cancel.
Chapter 20 Menu 2 WAN Setup | 210 |