Prestige 334 User’s Guide
34.4.0.1 Active Protocol
This field is a combination of mode and security protocols used for the VPN. See the Web Configurator part on VPN for more information on these parameters.
Table 107 Active Protocol: Encapsulation and Security Protocol
MODE | SECURITY PROTOCOL |
|
|
Tunnel | ESP |
Transport | AH |
34.4.0.2 Security Parameter Index (SPI)
To edit this menu, move the cursor to the Edit Manual Setup field in Menu 27.1.1 – IPSec Setup press [SPACE BAR] to select Yes and then press [ENTER] to go to Menu 27.1.1.2 – Manual Setup.
Figure 181 Menu 27.1.1.2 Manual Setup
Menu 27.1.1.2 – Manual Setup
Active Protocol= ESP Tunnel
ESP Setup
SPI (Decimal)=
Encryption Algorithm= DES
Key1=
Key2= N/A
Key3= N/A
Authentication Algorithm= MD5
Key= N/A
AH Setup
SPI (Decimal)= N/A
Authentication Algorithm= N/A
Key=
Press ENTER to Confirm or ESC to Cancel:
The following table describes the fields in this menu.
Table 108 Menu 27.1.1.2 Manual Setup
FIELD | DESCRIPTION |
|
|
Active Protocol | Press [SPACE BAR] to choose from ESP Tunnel, ESP Transport, AH Tunnel or AH |
| Transport and then press [ENTER]. Choosing an ESP combination causes the AH |
| Setup fields to be |
ESP Setup | The ESP Setup fields are N/A if you chose an AH Active Protocol. |
SPI (Decimal) | The SPI must be unique and from one to four integers ("0" to "9"). |
Chapter 34 VPN/IPSec Setup | 324 |