Prestige 334 User’s Guide

7.6.2Two Points To Remember About Trigger Ports

1Trigger events only happen on data that is going coming from inside the Prestige and going to the outside.

2If an application needs a continuous data stream, that port (range) will be tied up so that another computer on the LAN can’t trigger it.

7.7 Configuring Trigger Port Forwarding

To change your Prestige’s trigger port settings, click SUA/NAT and the Trigger Port tab. The screen appears as shown.

Note: Only one LAN computer can use a trigger port (range) at a time

Figure 34 Trigger Port

The following table describes the labels in this screen.

Table 27 Trigger Port

LABEL DESCRIPTION

#This is the rule index number (read-only).

Name

Type a unique name (up to 15 characters) for identification purposes. All characters

 

are permitted - including spaces.

99

Chapter 7 Network Address Translation (NAT) Screens