B2520 / B2540
Installation
Location conditions
By choosing an appropriate location, you preserve the longevity of the machine. Check that the selected location has the following characteristics:
-Choose a well ventilated location.
-Make sure not to obstruct the ventilation grids located on the left and right sides of the device. During the installation, make sure to place the machine thirty centimeters away from the surrounding objects so all the lids can be easily opened.
-Make sure that this location does not present any ammonia nor any other organic gasses emission hazard.
-The ground outlet (refer to the security notices presented in the Safety booklet) to which you plan to connect the machine must be located close to this one and have an easy access.
-Make sure that the machine is not directly exposed to sun light.
-Make sure not to place the machine in an area exposed to an air flow generated by an air conditioning, heating or ventilation system, nor in an area subject to large temperature or humidity variations.
-Choose a solid and horizontal surface on which the machine will not be exposed to intense vibrations.
-Keep the machine away from any object that could obstruct its ventilation ports.
-Do not place the machine close to hangings or any other flammable objects.
-Choose a location where splashes of the water and other liquids are limited.
-Make sure that this location is dry, clean and dust free.
Make sure to place the machine in well ventilated premises. When in operation, the printer generates a small amount of ozone. An unpleasant smell can come from the printer if it is used intensively in poorly ventilated premises. For a secure use, make sure you place the machine in well ventilated premises.
Cautions of use
Take into account the important precautions below when using the machine.
Running environment:
-Temperature: 10 °C to 32 °C with a maximum amplitude of 10 °C per hour.
-Humidity: 15 to 80 % of ambient humidity (without condensation), with a maximum amplitude of 20 % per hour.
Terminal:
The section below describes the precautions to be taken when using the machine:
-Never turn the machine off and never open the lids while printing.
-Never use gas or flammable liquids, or objects generating magnetic field close to the machine.
-When you unplug the power cord, always hold the connector without pulling the cord. A damaged cord presents a potential fire hazard or an electric shock hazard.
-Never touch the power cord with wet hands. You risk getting an electric shock.
-Always unplug the power cord before moving the machine. Otherwise, you could risk having the cord damaged and create a fire hazard or an electric shock hazard.
-Always unplug the power cord when you plan not to use the machine for a long period of time.
-Never put objects on the power cord, never pull it and never fold it. This could cause a fire hazard or an electric shock hazard.
-Always make sure that the machine is not sitting on the power cord or any other electric device communication cables. Make sure also that neither cord nor cable is introduced to the machine inner mechanism. This would expose you to a machine malfunction risk or to a fire hazard.
-Make sure that the printer is unplugged from the power outlet before connecting or disconnecting an interface cable to the printer (use a shielded interface cable).
-Never try to remove any fixed pane or hood. The machine contains high voltage circuits. Any contact with these circuits can cause an electric shock risk.
- 5 -