Oki B2500 Series manual Printing the functions guide, Print / Functions List

B2520 / B2540

Parameter		Signification
74 - Erase mailbox	When the fax machine receives an
	e-mail with an attachment and
	cannot open it, it erases the
	message from the ISP MBX, prints
	and transmits with a notice of
	uncomprehension to the message
	sender.
	At E-mail reception, the fax does
	not destroy the MBX message, it
	prints a notice of uncomprehension
	asking you to recuperate this
	message	with	your	computer
	equipment.
	This parameter is useful only if you
	have PC equipment. The memory
	capacity is limited, you need to
	empty your MBX or else new
	messages may not be received.
75 - Text Attchmt.	Editing YES / NO and printing the
	received Internet documents.
76 - Attchmt format	Default format of document sent on
	the Internet:
	PDF : monochrome or colour
	IMAGE : monochrome (TIFF) or
	colour (JPEG)
77 - LAN speed	To define	the	communication
	speed of the peripheral units in
	relation to the implemented Local
	Area Network (LAN).
80 - Toner save	Makes printing lighter to save toner
	cartridge ink.
81Font number	Starts the printing of the log list.
	This parameter lets you set the
	default PCL font. The possible
	values are included between 5 and
	128 inclus. The default value is 0
	(Courier).
82 Form lines	This parameter lets you set the
	number of lines per page.
	This variable is linked to the PJL
	variables:	PAPER		and
	ORIENTATION. If you modify one
	of these variables, the Form Lines
	variable is	automatically		updated
	(only for the print job in progress) to
	respect the same spacing.
	The possible values are included
	between 5 and 128 inclus. The
	default value is 60.
83 Font pitch	This parameter lets you set the
	default font spacing, in characters
	per inch (the default font must be of
	type non-proportional).
	The possible values are included
	between 0,44 and 99,99 inclus.
	The default value is 10,00.

	Parameter	The possible values are included					Parameters/Setup-
			Signification
84	Ptsize	This parameter lets you set the
		default font height, in points (the
		default font must be of type
		proportional).
		The possible values are included
		between 4,00 and 999,75 (by step
		of 0,25). The default value is 12,00.
85	Line termin.	This parameter lets you define line
		breaks	conversion: <CR>,			<LF>
		and <FF>.
		between 0 and 3. The default value					6
		is 0.
86	Orientation	This parameter lets you set the
		page	orientation:		portrait or
		landscape. The default value is
		"portrait".
90	- RAW Port	RAW network print port connection.
91	- Printer error	Time-out before document being
timeout		printed is deleted following a print
		error in PC print mode.
92	- Printer wait	Wait time-out for data from PC
timeout		before the task is deleted in PC
		print.
93	- Replace format	Page	format	change.		This
		parameter allows you to print a
		LETTER format document on A4
		pages	using	the	LETTER/A4
		setting.
94	- Printer class	Printing in PCL-/Postscript Mode
		Printing in GDI mode
95 Symbol set		This parameter lets you set the
		default character set. The possible
		values are included between CS1
		and CS30 inclus. The default value
		is CS1 (Roman8).
96	- NBR. WEP	Number of WEP keys allowed
Keys		(from 1 to 4).

Printing the functions guide

The printing is not possible on A5 paper format.

51 - PRINT / FUNCTIONS LIST

1 Press on and enter 51 with the digital keypad.

The printing of the functions guide starts.

- 27 -