B2520 / B2540
Technical Parameters
As delivered your machine is preset by default. However, you may adjust it to meet your requirements by resetting the technical parameters.
To set the technical parameters:
29 - SETUP / TECHNICALS
1Select the desired parameter and confirm with OK.
2 With the keys | or | , | modify | the | parameter | ||
settings by following the table below and press OK. | |||||||
Parameter |
|
| Signification |
|
| ||
|
|
|
| ||||
|
| ||||||
|
| ||||||
1 - Scanning mode | Default value of the scan mode | ||||||
| resolution for the documents to be | ||||||
| transmitted. |
|
|
|
| ||
|
| ||||||
2 - TX header | If this parameter is on, your header | ||||||
| will appear on all documents sent | ||||||
| to your subscribers with your name, | ||||||
| number, date and number of | ||||||
| pages. |
|
|
|
|
| |
| Warning: If you send a fax from the | ||||||
| document loader, the transmission | ||||||
| header will not appear on the | ||||||
| document | your | correspondent | ||||
| receives. |
|
|
|
|
| |
|
|
| |||||
3 - TX speed | Transmission speed for | outgoing | |||||
| documents. |
|
|
|
| ||
| For a quality telephone line | ||||||
| (compatible, | no |
| echo), | |||
| communications | occur | at | ||||
| maximum speed. |
|
|
| |||
| However, it may be necessary to | ||||||
| restrict the transmission speed for | ||||||
| some calls. |
|
|
|
| ||
|
| ||||||
4 - Echo protect | If this parameter is on, the | ||||||
| echo will be reduced during long | ||||||
| distance calls. |
|
|
| |||
|
| ||||||
6 - EPT mode | For some long distance calls | ||||||
| (satellite), the | ||||||
| disturb the call. |
|
|
| |||
|
|
|
| ||||
7 - COM. display | Choice | between | transmission | ||||
| speed displayed or number of the | ||||||
| page in progress. |
|
|
| |||
|
| ||||||
8 - Eco energy | Choosing the printer standby delay: | ||||||
(ECO) | the printer will switch to standby | ||||||
| after a delay (in minutes) of NON- | ||||||
| operation or during the period of | ||||||
| time of your choice. |
|
| ||||
|
|
|
|
|
|
|
|
Parameter |
| Signification |
| |
|
| |||
|
| |||
10 - RX header | If this parameter is on, all | |||
| documents received by your fax will | |||
| include | the subscriber’s | header | |
| with his name, number (if available) | |||
| fax print date and the page number. | |||
|
| |||
11 - RX speed | Transmission speed for incoming | |||
| documents. |
|
| |
| For a quality telephone line | |||
| (compatible, | no | echo), | |
| communications | occur | at | |
| maximum speed. |
|
| |
| However, it may be necessary to | |||
| restrict the transmission speed for | |||
| some calls. |
|
| |
|
| |||
12 - Rings | Number of rings to automatically | |||
| start your machine. |
|
| |
|
| |||
13 - Discard size | The Discard Size parameter only | |||
| defines the printing of received | |||
| faxes . The number of lines of a | |||
| document can be too high for the | |||
| printing | paper | format. | This |
| parameter defines | the threshold | ||
| beyond which the extra lines are | |||
| printed on a second page. Bellow | |||
| this threshold, extras lines are | |||
| deleted. |
|
|
|
| If you choose With, the threshold | |||
| is set on 3 centimeters. |
| ||
| If you choose Without, the | |||
| threshold is set on 1 centimeter. | |||
|
| |||
20 - E.C.M. | This parameter helps correct the | |||
| calls made on disturbed telephone | |||
| lines. It is used when the lines are | |||
| weak or | too noisy. Transmission | ||
| times may be longer. |
| ||
|
| |||
25 - TEL Impedance | This parameter lets you choose | |||
| between a complex impedance and | |||
| a 600 Ohm impedance, depending | |||
| on the telephone network your | |||
| terminal is connected to. |
| ||
|
|
|
|
|
73 - Improve rep @ | This | parameter | lets | you |
| automatically register the Internet | |||
| address of your subscribers fax | |||
| during a call (if available). |
| ||
|
|
|
|
|
- 26 -